Spray-Lock FRP Adhesive is changing the rules when installing fiberglass-reinforced panels (FRP), on both porous and non-porous substrates. With Spray-Lock FRP, a large area can be sprayed with a 4-hour working time. Short adhesive working times and constantly applying adhesive to the back of the panels are no longer an issue. Installers can spray out the work area and then focus on sheet installation without stopping to spread glue — typically installing 30% more FRP sheets a day and greatly increasing productivity. Spray-Lock FRP has instant grab that eliminates panels from sagging. Spray-Lock FRP Adhesive has a proven track record of over 8 million square feet installed with a single retailer.
• Cuts labor by 30%
• Works over porous and non-porous substrates
• 4-hour working time
• No bracing required
• No need to shut down HVAC in occupied space
• No offensive odors
• Easy clean up with water while the adhesive is still wet
• 0.02 g/ml VOC content (lowest in the industry)
With 0.02 g/ml VOC content, Spray-Lock FRP has no offensive odor, and is a more sustainable adhesive. Three cans of Spray-Lock FRP Adhesive, weighing a total of 5 lbs. provides the same coverage as a 3.5 gallon, 45 lb. bucket of trowel-based adhesive. Less weight also means smaller truckloads. And, unlike large trowel adhesive buckets that occupy landfills, Spray-Lock comes in fully recyclable aluminum cans. Spray-Lock has reduced adhesive consumption for one single retailer by 6,775,156 pounds of adhesive, eliminating 146 truckloads off the highway! It also uses a non-ozone depleting propellant and is endorsed by numerous environmental accreditation programs worldwide.
*Green Seal Certified: This product meets Green Sealª Standard GS-36 based on effective performance and protective limits on VOCs and human & environmental toxicity. GreenSeal.org. **According to EPA document:”National Volatile Organic Compound Emission Standards For Consumer Products” for aerosol adhesive.