Wall Tile Adhesive
Spray-Lock WTA (Wall Tile Adhesive) is truly one of the biggest break-through technologies for installing wall tile in over 30 years. Spray-Lock WTA is a single-side application that cuts install time by over 50%! There are no sagging tiles nor any need for ledger board when working around a design. Installers can see reference lines on the substrate even after the adhesive has been applied. With Spray-Lock WTA, tile can be installed over porous or non-porous substrates. The biggest time saver is the ability to grout within 1 hour of the adhesive application. This gives installers the flexibility to finish a backsplash or wall tile installation in only 1 day, rather than coming back 24 hours later to grout as the traditional methods require. Spray-Lock WTA will work on tiles up to 6”x6” and all mosaic tiles on a backing. Spray-Lock WTA is TCNA (Tile Council of North America) approved for use in shower applications.
• Cuts labor by 50%
• Works over porous and non-porous substrates
• Grout in 1 hour
• No tile sagging
• No ledger boards required
• No need to shut down HVAC in occupied space
• No offensive odors
• Easy clean up with water while the adhesive is still wet
• 0.02 g/ml VOC content (lowest in the industry)
Spray-Lock WTA is a more sustainable adhesive. Because Spray-Lock uses 80% less adhesive to achieve the same result, it significantly reduces the environmental footprint. Spray-Lock has reduced adhesive consumption for one single retailer by 6,775,156 pounds of adhesive, eliminating 146 truckloads off the highway! Spray-Lock WTA contains 0.02 g/ml VOC content, the lowest in the industry! Unlike messy trowel adhesive buckets that occupy landfills, Spray-Lock comes in fully recyclable aluminum cans. Spray-Lock uses a non-ozone depleting propellant and is endorsed by numerous environmental accreditation programs worldwide.